The instant repair for all makes of Rib's, inflatables and liferafts. The patented 'ClamSeal' is a compact safety device, which can be quickly inserted into any tear in a tube or fabric floor up to 90mm [3.5 inches]. Hand tighten the nut is all that is needed before reinflating the tube for an instant repair above or below the waterline. Giving you ample time before a permanent repair can be carried out.

Voltage 12 V DC
Max pressure 1 bar/14,5 psi
Piston flow rate 160 l/min
Consumption 20 A max

An easy to use, powerful, automatic electric inflator with a maximum pressure of 1 bar (14.5psi). It will inflate, or deflate, all types of dinghies, upto 6m, plus their floors.

Repair kits for repairing small holes and tears on PVC inflatables. Supplied in hard waterproof container with tamper proof lid. Ideal to keep on board. Contains 70ml tube of PVC adhesive, 35 x 15cm of PVC material and instructions.  PLEASE NOTE:- For a permanant repair 2 part adhesive must be used.

This super-fast air pump cuts inflation time for a typical four man dinghy to less than 2 minutes - far quicker than using a foot pump! The unit is supplied with a whole range of adjustable nozzles to fit plastic, rubber and sprung valves, on all major brands, from Avon to Zodiac.

The pump can also be used for other types of inflatable products, such as RIBs, marker buoys, even PVC airbeds. In Deflator mode, it enables every last ounce of air to be removed making it much easier to re-pack and stow the inflatable after use.

The unit also has a built in temperature sensitive valve that prevents over inflation and also protects the pump from overheating.

Lightweight, compact yet with a rugged construction, the new Rule Inflator/Deflator is simple to use and is powered from a standard 12 volt boat or car battery, drawing a maximum of 25 Amps and producing an airflow of 550 lpm.

By simply attaching these wheels to your tender, you will be easily able to wheel
your tender anywhere over hard sand and paved surfaces.